OEM, ODM and private label pod production.
Bring a device and we tool a pod for it. Bring a brand and we build the range behind it. This page covers what the factory actually does, what it needs from you, and where the limits are.
Scope
What "OEM" and "ODM" mean here
The two are often used interchangeably. On this page OEM means we manufacture to your specification, and ODM means we bring existing platform design and adapt it to your brand.
Manufacture to your spec
You supply the design intent — device geometry, pod dimensions, branding and packaging requirement. The factory engineers to it, produces fitment samples, and moves to tooling only after the sample is approved in writing.
- Your geometry, your tooling, your brand
- Fitment sample before tooling commitment
- Packaging and dieline produced to your artwork
Adapt our platform
You start from the existing pod platform — the same core used across the catalogue — and change shell geometry, finish, flavour direction and branding. Shorter lead time, lower tooling exposure, and no need to solve fitment from scratch.
- Shared pod base, customised exterior
- Faster route to a first production run
- Still your brand on the finished product
Process
Four stages, no shortcuts
The order matters. Skipping the sample stage is what turns a pod project into a rework project.
STAGE 01
Brief & feasibility
Market, device, quantity band, nicotine and packaging. We confirm what is achievable and flag what is not.
STAGE 02
Engineering sample
Fitment sample produced against your device or 3D file, plus flavour and finish direction.
STAGE 03
Tooling & pilot run
Tooling committed only after written sample approval, then a pilot run to validate the line.
STAGE 04
Mass production
Batch production with QC gates, packaging, and manufacturer-side regulatory documentation.
Custom geometry is standard ODM scope. If your device has unusual pod dimensions, send a physical unit or a 3D file and the sample stage will establish whether an off-the-shelf base fits or a bespoke shell is required.
Private label
Your brand, our production line
Private label is the most common entry point for distributors who want a differentiated range without designing hardware. Branding runs across three surfaces.
Product surface
Shell colour, finish and logo on the pod body, matched across the range.
Packaging
Custom dielines, colour boxes, multipacks and display boxes to your artwork.
Compliance copy
Health warnings, ingredient statements and market-specific labelling per destination.
Brand holders own their market authorisation. We prepare the manufacturer-side documentation your filing depends on — we do not file on your behalf, and we do not act as the manufacturer of record for your submission.
Capability
What the factory covers
| Capability | Scope | Included in OEM | Included in ODM |
|---|---|---|---|
| Shell tooling | Bespoke pod shell geometry | Yes | Optional |
| Flavour development | Direction, strength, formulation | Yes | Yes |
| Coil configuration | Dual mesh 1.0Ω / ceramic | Yes | Yes |
| Wick selection | Organic cotton | Yes | Yes |
| Branding & artwork | Shell, logo, packaging | Yes | Yes |
| Packaging engineering | Custom dielines and boxes | Yes | Yes |
| Regulatory documentation | Manufacturer-side data pack | Yes | Yes |
| Tooling cost ownership | Who pays for the mould | Agreed per project | Agreed per project |
| Tooling exclusivity | Mould reserved to your brand | Agreed per project | Agreed per project |
| MOQ thresholds | Per configuration | Set per configuration | Set per configuration |
Swipe the table sideways to see every column →
Tooling cost, exclusivity and MOQ thresholds are commercial terms we confirm per project — they depend on geometry, volume band and how many SKUs you are launching. The factory does not publish a blanket number because a blanket number is usually wrong.
IP & confidentiality
Protecting your design intent
Buyers ask about this before they send CAD files, and they are right to.
- NDA
- Signed on request before CAD exchange
- Tooling ownership
- Agreed per project
- Brand exclusivity
- Available by agreement — scope set per market
- Refusal of conflicting orders
- Confirmed per project
- Packaging artwork rights
- Retained by your brand
Two lines here are still open because we will not state a policy the factory has not agreed. Raise them in your enquiry and the sales team will confirm them in writing before any design material changes hands.
Next step
Send the device. We will tell you what it takes.
Share your device model or 3D file, target market and quantity band. The factory will confirm feasibility, the sample route and the tooling exposure before you commit.
Scope a project
Start an OEM or ODM programme
OEM and ODM work is scoped against your artwork, target market and volume band, so a published price would not apply to your project. Send the brief and our engineering team returns a tooling plan, development timeline and unit pricing.
- moyucong@yunmiaonet.cn
- +86 15561912527
- Sampling
- 7–15 days
- Production
- 15–30 days
- MOQ
- Set per SKU — tell us your target volume